WE SHIP ANYWHERE

Woodpecker AP-H & AP-H Plus Air Polisher

  • Prices change with available options


Available Options


OR
woodpecker logo
Woodpecker Dental Air Polisher AP-H L & AP-H-L-Plus: (2024 Version)
 
The AP-H L air polisher is an upgraded version of the AP-H air polisher, it includes the AP-1 Plus L Supragingival Handpiece.

The AP-H L-Plus air polisher is an upgraded version of the AP-H Plus air polisher, it includes the AP-1 Plus L Supragingival Handpiece & AP-2 Plus L Subgingival Handpiece 

AP-1 Plus L is not compatible with AP-H. The handpieces between the new version and old version are NOT compatible.

AP-1 Plus L & AP-2 Plus L  are only compatible with AP-H L air polisher. AP-1 Plus & AP-2 Plus are only compatible with AP-H air polisher.

PLEASE READ TO ENSURE YOU ORDER THE CORRECT REPLACEMENT HANDPIECE FOR YOUR AP-H OR AP-H-L MODEL

AP-H L & AP-H-L-Plus Handpiece

AP-H L & AP-H-L-Plus Design

Woodpecker Regular vs. Plus Model - What is the Difference?

Please note that the AP-H-Plus is the same as the AP-H, but it also includes the AP-2 subgingival handpiece, subgingival tips (qty 10) and a wrench to change the handpieces. If you do not require subgingival air polishing you can order the AP-H model.


The AP-H is an affordable quality hand-held dental air polisher.

The main features include:

  • A comfortable lightweight design (market leader in product weight) that is ergonomic to use;
  • Easy to adjust angle and spray;
  • Supragingival & Subgingival modes available Two-in-one function if have AP-1 Plus and AP-2 Plus Handpieces;
  • 0.7mm small-caliber nozzle that delivers a more concentrated powder output for precise & accurate scaling;
  • Three-section air-polishing handpiece design;
  • Detachable handpiece;
  • User-friendly design;
  • Suitable for all dental chairs and easy to install;
  • The subgingival nozzle can be rotated 360 after installation;
  • Pre-bendable subgingival nozzle design makes it easy to clear dead ends;
  • Subgingival nozzle with three directions for powder and one for water output (minimum particle size is 0.25mm);
  • Efficiently eliminates biofilms; and
  • Transparent powder container enables easier observation of remaining powder.

AP-H Specifications

Input water pressure: 0.7bar to 2.2bar (70-220kPa)

Input air pressure: 3.5bar to 4.5bar (350-450kPa)

Working mode: continuous operation, Intermittent operation

Weight: About 0.150kg

Connector: Meets the requirements of YY / T 0514

Operation environment:

  • Environment temperature: + 10℃~ +40℃
  • Relative humidity: 30% ~ 75%
  • Atmospheric pressure:50kPa ~ 106kPa



Write a review

Note: HTML is not translated!
    Bad           Good
MADE IN THE USA DETROIT, MI